3D print the Acropolium of Carthage
A free, printable model of the Acropolium of Carthage, with its twin front towers, large cupola and ring of small spires beside larger buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Acropolium of Carthage in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Spires around the cupola
Eight short spires ring the large cupola, and the front towers end in small domes. Print slowly with good cooling and use a layer height of 0.12–0.16 mm to keep the tips crisp.
- Battlements and tall arched windows
The battlement-like parapets and rows of narrow arched windows are fine surface detail. A larger print keeps them; Print friendly adapts them to the print scale, while Full detail keeps every modeled feature.
- One piece with the ground
The Acropolium of Carthage is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Acropolium of Carthage takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Acropolium of Carthage
The building known as the Acropolium, or Saint Louis Cathedral, is a former Latin Catholic church in Carthage, Tunisia. It crowns Byrsa Hill, close to the ruins of the Punic and then Roman city. It rests on the ruins of an old temple to Eshmun, who was the Punic god of healing. The name "Acropolium" has been used since 1993. The building is no longer used for worship; it hosts public events and concerts of Tunisian and classical music.
Hussein II Bey gave the French consul-general permission to build a cathedral at ancient Carthage. Construction ran from 1884 to 1890, during the French protectorate, and Cardinal Lavigerie dedicated it to Saint Louis, who died near that location in 1270, during the Eighth Crusade. Descendants of crusaders' families, who were companions of the sovereign, helped pay for the work.
Built to plans by the abbot Pougnet, the church draws on Byzantine, Gothic and Moorish styles and is laid out as a Latin cross measuring 65 meters by 30. Two square towers frame the façade. A large cupola covers the crossing, with eight short towers or spires around it, and a smaller cupola crowns the apse. The nave and two aisles are separated by arches, and the church contains 284 stained glass windows. Its great bell weighs six tons.
About this model
The Acropolium of Carthage is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





