3D print the Hammouda Pacha Mosque
A free, printable 3D model of the Hammouda Pacha Mosque, its octagonal minaret and broad prayer hall amid the dense buildings of the Tunis Medina, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Hammouda Pacha Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Octagonal minaret top
The octagonal minaret and its small top gallery are the finest detail. Print friendly adapts them at small sizes; Full detail on a larger print, with 0.12–0.16 mm layers, keeps them crisp.
- One piece with the ground
The Hammouda Pacha Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hammouda Pacha Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hammouda Pacha Mosque
The Hammouda Pacha Mosque is also known as the Hamouda Bay al Mouradi or Hammouda Bay Mosque. Located in Tunis, Tunisia, it has the status of an official historical monument, and it lies in the Medina area on Sidi Ben Arous street.
Hammouda Bey built the mosque in 1655, and it was the second mosque built in Tunis by the Hanafi rite. Its architecture shows Ottoman influences, and it has an octagonal minaret and a rectangular prayer hall. It has been a listed monument of Tunisia since March 13, 1912.
About this model
The Hammouda Pacha Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





