3D print the Admiralty, Saint Petersburg
A free, printable model of the Admiralty in Saint Petersburg, with its building and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 74 m
- On a 160 mm print
- 14 mm
- Scale
- 1:5,938
74 m of the Admiralty, Saint Petersburg, 14 mm on your shelf
Make this print opens the generator on a 950 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roofline and facade edges
The building reads mainly through its roofline and long facade edges. A larger print helps them stay defined, and 0.12–0.16 mm layers keep the walls crisp.
- Tall wall surfaces
Tall wall surfaces show layer lines. Print slowly on those faces, and use 0.12–0.16 mm layers to keep them even.
- One piece with the ground
The Admiralty, Saint Petersburg is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Admiralty, Saint Petersburg takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Admiralty, Saint Petersburg
The Admiralty is a historic building complex in central Saint Petersburg, Russia. It serves as headquarters for the Russian Navy and formerly housed the Imperial Russian Navy's Admiralty Board. Peter the Great commissioned it as one of the city's original buildings, and its spire marks the focal point of three main old-city streets: Voznesensky Avenue, Gorokhovaya Street, and Nevsky Prospect.
The Admiralty began in 1704 as a fortified shipyard, later surrounded by five bastions and protected by a moat. Between 1806 and 1823 the building was rebuilt in the Empire Style to a design by Andreyan Zakharov, along the Admiralty Embankment on the Great Neva. The bastions were demolished to make way for Alexander Garden.
From 1927 to 1998 the building held the engineering school for both the Soviet and Russian navies, and it served as headquarters for the Leningrad Naval Base until 2009. In 2012 the Russian Navy moved its headquarters back. The spire's golden weather vane, shaped like a small sailing warship, was designed by Harmen van Bol'es, a Dutch master builder. Vladimir Nabokov, a native of the city, wrote a short story called "The Admiralty Spire" in May 1933.
About this model
The Admiralty, Saint Petersburg is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
