3D print the Alexander Palace
A free, printable model of the Alexander Palace and the grounds and buildings around it at Tsarskoye Selo, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A long classical front
The palace is a long, low block, so most of its detail sits in the wall faces and the roof line. Layers of 0.12 to 0.16 mm keep those edges crisp.
- A bigger print for the wings
The wings and the central block are the parts to watch. A larger print, or Full detail with a fine nozzle, keeps them from blurring into the ground.
- One piece with the ground
The Alexander Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Alexander Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Alexander Palace
The Alexander Palace, once an imperial residence, stands at Tsarskoye Selo, on a plateau about 48 km (30 miles) south of Saint Petersburg. Catherine the Great ordered it in 1792 for her grandson, Grand Duke Alexander Pavlovich, when he married in 1793, and Giacomo Quarenghi planned the Neoclassical building, which went up between 1792 and 1796.
It stands in Alexander Park, close to Catherine Park and to the Catherine Palace, which is larger and more elaborate. Nicholas II and his family made it their preferred residence, finding its privacy and seclusion a better fit than the Winter Palace, and his eldest child, Olga, was born there. After the February Revolution the palace became the family's first place of imprisonment, in 1917.
Nicholas II had the palace wired for electricity and fitted with a telephone system, and in 1899 a hydraulic lift linked the empress's rooms to the children's rooms above. The palace had been under renovation for years when, in summer 2021, it opened as a state museum that displays relics of the former imperial dynasty.
About this model
The Alexander Palace is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
