3D print the Aeroscopia aircraft exhibition hangar
A free, printable model of the Aeroscopia aircraft exhibition hangar, a long curved hall with a smooth ovoid shell, among roads and nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 23 m
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
23 m of the Aeroscopia aircraft exhibition hangar, 6 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Curved shell and end canopy
The hall curves in a crescent under a continuous ovoid shell, and a deep open canopy projects at the end. Print friendly adapts the thin shell edge; Full detail keeps it for a large print.
- Smooth roof skin
The roof is a smooth, continuous surface without raised seam relief. A larger print and 0.12–0.16 mm layers keep the curved silhouette and the recessed end panels clean.
- One piece with the ground
The Aeroscopia aircraft exhibition hangar is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Aeroscopia aircraft exhibition hangar takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Aeroscopia aircraft exhibition hangar
The Aeroscopia aircraft exhibition hangar stands on Allée André Turcat in Blagnac, France. It is the museum's main exhibition hall, designed by Cardete et Huet Architectes, and the museum was inaugurated on January 13, 2015. It forms a circular arc around a body of water, and its section is ovoid.
The exhibition hall measures 100 m long, 72 m wide and 23 m high. A finely incised black steel skin covers the exterior, while the roof is made of zinc sheets crimped together. Three outdoor aprons stand beside the hall, and visitors can also visit the Concorde and the A300B at the museum.
About this model
The Aeroscopia aircraft exhibition hangar is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
