Akita Station in 3D
Akita Station appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)
Copyright notice
The design of Akita Station may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim supports and curving roof
The station building rests on slim supports above the tracks, and its roof curves in places. Full detail keeps them on larger prints; Print friendly adapts thin parts to the print scale.
- Long, low shape
The station is a long, low building beside wide track areas. A larger print and 0.12–0.16 mm layers keep its edges and roof lines sharp.
- One piece with the ground
Akita Station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Akita Station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Akita Station
Akita Station is a junction railway station serving Akita in Japan's Akita Prefecture. East Japan Railway Company, known as JR East, runs it. It is the northern end of the Akita Shinkansen line: Morioka is 127.3 kilometers (79.1 mi) away, and Tokyo is 662.6 km (411.7 mi) away. It also terminates the Uetsu Main Line in the north and is a stop on the Ōu Main Line.
The platforms sit at ground level, while most passenger facilities occupy a building over the tracks. One side platform on the west side serves Track 2; a bay platform for Track 1 sits at the north end, and three island platforms handle the other tracks. Tracks 7 and 8 use the narrow gauge, while Tracks 11 and 12 use the standard gauge needed for the Akita Shinkansen. Inside are a Midori no Madoguchi ticket office (staffed), a tourist information center, convenience stores and a Topico department store near the west entrance.
Akita Station opened on October 21, 1902, and joined the JR East network when JNR was privatized on April 1, 1987. The station building was renovated in 1997. Nearby are Akita Northern Gate Square, the AL☆Ve shopping and hotel complex near the east entrance, and Senshu Park.
About this model
Akita Station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





