3D print Alexander Johnston Hall
A free, printable model of Alexander Johnston Hall and the streets and open ground around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dormers, tower and fire escape
Several steep roofs with small dormers, a tower and thin fire-escape stairs are the most delicate parts. Full detail keeps them at larger sizes; Print friendly thickens them for small prints.
- One piece with the ground
Alexander Johnston Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Alexander Johnston Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Alexander Johnston Hall
Alexander Johnston Hall sits where Somerset Street meets College Avenue, in New Brunswick, New Jersey. It is the second oldest building at Rutgers University. It was put up in 1830 to accommodate the growth of the Rutgers Preparatory School and two literary societies, the Philoclean and the Peithessophian. On July 18, 1975, the building entered the National Register of Historic Places under its historic name, Rutgers Preparatory School, cited for architecture and education.
Local architect and builder Nicholas Wyckoff designed it in 1830, and the Rutgers College Grammar School, later Rutgers Preparatory School, was based there. The Rutgers College trustees hired the architect Henry Janeway Hardenbergh in 1870 to design a two-story addition. It was the first of Hardenbergh's three commissions for the college; Geology Hall (1872) and Kirkpatrick Chapel were the others. The preparatory school used the building from 1830 to 1963. A 1964 renaming by the university honored Alexander Johnston, a graduate of 1870 who taught history and classics at the school; one of his pupils there was William H. S. Demarest, later president of Rutgers.
About this model
Alexander Johnston Hall is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
