A white 3D print of the Anbariya Mosque, a domed mosque with two tall slender minarets and a row of small domes above a front arcade, beside wide roads.

Anbariya Mosque in 3D

The Anbariya Mosque appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Anbariya Mosque model, North view North
  • Anbariya Mosque model, East view East
  • Anbariya Mosque model, South view South
  • Anbariya Mosque model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Anbariya Mosque may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
9 mm
Scale
1:3,750

9 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Two slender minarets

    The two minarets are tall and thin, each with a small balcony near the top. Layers of 0.12 to 0.16 mm and slow printing help them print cleanly; Print friendly adapts them for your print scale.

  2. Domes and arcade

    A row of small domes sits above the front arcade, with a large ringed dome behind. Full detail keeps every ring and arch, which suits a larger print.

  3. One piece with the ground

    The Anbariya Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Anbariya Mosque takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Anbariya Mosque

The Anbariya Mosque, whose Arabic name is Masjid al-‘Anbarīyah, is also known as the Hamidiye Mosque. Ottoman Sultan Abdülhamid II had it built in 1908, and it formed part of the Hejaz railway project in Madinah, in Saudi Arabia's Medina Province.

The mosque stood beside al-Muazzim Railway Station, home to the Hejaz Railway Museum. It took its name from the Anbariya Gate, next to which it was located. Its architecture is Ottoman, and its area is given as 311 m².

About this model

The Anbariya Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits