3D print the Aspire Tower
A free, printable model of the Aspire Tower in Doha, with the surrounding city, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Aspire Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 300 m
- On a 160 mm print
- 81 mm
- Scale
- 1:3,750
300 m of the Aspire Tower, 81 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender crown members
The open crown is carried on thin diagonal members and outer hangers. Print friendly adapts them to the print scale; Full detail keeps them for a large print or a fine nozzle.
- Pinched waist and pool
The tower narrows at mid-height before widening again, and the pool projects from one side. A larger print keeps both outlines clear; 0.12–0.16 mm layers help the vertical framing.
- One piece with the ground
The Aspire Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Aspire Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Aspire Tower
The Aspire Tower, also called The Torch Doha, is a 300 m (980 ft) hotel tower in the Aspire Zone development in Doha, Qatar. Architect Hadi Simaan and AREP designed it with engineer Ove Arup and Partners. It was the focal point of the 15th Asian Games, which Qatar hosted in December 2006, and it served as a giant torch during the event.
Construction began in April 2005, and the building was completed in November 2007. Its structure is a reinforced-concrete cylinder core between 12 and 18 m in diameter, wrapped in cantilevered steel beams, steel columns and glass-paneled outer walls. The glass skin helps keep temperatures comfortable in the desert climate.
Inside are a five-star hotel and a sports museum, along with a health club whose swimming pool cantilevers from the building. There is also an observation deck, and a restaurant that revolves. The pool sits 80 m (260 ft) above ground and reaches 12 m (39 ft) out from the facade, carried on a deep steel truss.
About this model
The Aspire Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
