3D print the Athens Towers
A free, printable model of the Athens Towers on Mesogeion Avenue, with the tall slab and its lower wing, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Athens Towers in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 103 m
- On a 160 mm print
- 30 mm
- Scale
- 1:3,750
103 m of the Athens Towers, 30 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Marble piers and glass
The facade depends on the contrast between broad marble piers and recessed glass. Print friendly detail merges the finest mullions; Full detail and 0.12–0.16 mm layers keep the vertical rhythm on a larger print.
- Rooftop antennas
Several thin antenna groups and dishes sit on the flat crown. They are the most fragile shapes in the model, so handle the print carefully or choose Print friendly detail at smaller sizes.
- One piece with the ground
The Athens Towers is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Athens Towers takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Athens Towers
Athens Towers is a two-building complex in Ampelokipi, a district of Athens, Greece, on 2 Mesogeion Avenue. The two towers are unequal in height and floor count. Tower 1 has 28 stories and rises 103 m (338 ft), making it Greece's tallest building; a shorter second tower beside it joins it at the first floor.
Construction began in 1968 and finished in 1971, during the dictatorship, and at the time of completion the complex was Southeast Europe's second-tallest building. Ioannis Vikelas and Ioannis Kympritis were the architects. Its minimalistic, futuristic design uses glass curtain walls in aluminum frames, white marble columns and brown anodized aluminum verticals, and it imitates buildings in Europe and America such as the Seagram Building.
Steel columns and reinforced concrete slabs form a composite structure, the first of its kind in the Balkans, and the building used a plastic foundation system developed by Aristarchos Oikonomou. Inside, the partitions can be moved, and three basements provide parking, warehouses and an engine room. The buildings house shops and offices.
About this model
The Athens Towers is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
