3D print the Vienna City Hall
A free, printable 3D model of Vienna City Hall, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Vienna City Hall in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 98 m
- On a 160 mm print
- 28 mm
- Scale
- 1:3,750
98 m of the Vienna City Hall, 28 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Towers and fine detail
Towers have thin parts near the top. Print friendly adapts them at small sizes; a larger print with Full detail, slow speed and cooling suits the tower tops.
- One piece with the ground
The Vienna City Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Vienna City Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Vienna City Hall
Vienna's town hall, the Wiener Rathaus, stands on the Rathausplatz in the Innere Stadt, just off the Ringstrasse. Friedrich von Schmidt designed the Gothic Revival building, which was built from 1872 to 1883; he had won the competition held in 1868. The Mayor of Vienna's offices, along with the city and state government, are housed here.
Freestanding, the Rathaus is a Neo-Gothic building with Renaissance elements. A central Risalit carries a large tower, flanked by four smaller towers, with open arcades along the ground floor. The tower, 98 meters high, is topped by the Rathausmann, a figure symbolic of Vienna. The building measures 152 meters in length and 127 in width, and has 2,035 windows and 1,575 rooms.
The site was the Josefstädter Glacis, formerly a parade ground and restricted area before the city walls were demolished. The foundation stone was laid on June 14, 1873, and the final stone was placed on September 12, 1883, coinciding with the bicentennial of the Ottoman defeat in 1683. The City Council moved in on June 23, 1885. Construction cost about 14 million florins.
About this model
The Vienna City Hall is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
