3D print the Ayodhya Airport Terminal

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. Stepped crowns and finials

   Shallow stepped crowns and small finials sit on the roof, with the tallest on the center line. Print friendly adapts these small parts to the print scale; a larger print or Full detail keeps them crisp.

2. Open entrance porches

   The entrance is a row of deep, open porches behind square columns with spreading capitals. Layers of 0.12–0.16 mm hold the column bands and canopy edges.

3. One piece with the ground

   The Ayodhya Airport Terminal is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

4. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

5. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ayodhya Airport Terminal takes the building color.

6. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.