3D print the AZ Tower
A free, printable model of the AZ Tower, a tall bending tower rising from a wide low base, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
AZ Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 111 m
- On a 160 mm print
- 30 mm
- Scale
- 1:3,750
111 m of the AZ Tower, 30 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bending shaft and crown blocks
The shaft bends gently and ends in a few stacked blocks. Print friendly adapts the small crown blocks to the print scale; Full detail keeps them on a larger print.
- Window grid and round roof pads
A fine window grid covers the tower, and round pads sit on the low roof. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
The AZ Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The AZ Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the AZ Tower
Brno's AZ Tower, a skyscraper on Pražákova street in the Brno-center district, is 111 m (364 ft) tall with 30 floors and holds the title of the Czech Republic's tallest building. Offices, retail and residential space all share the building.
Construction began in 2011 and finished in April 2013. The building has over 17,000 m² (180,000 ft²) of floor area. M-Palace and Spielberk Towers stand nearby, and Spielberk Tower B was Brno's tallest building before the AZ Tower arrived.
About this model
The AZ Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
