3D print Børsen
A free, printable model of Børsen, a long brick bourse with a steep roof and a tall dragon-tail spire, in the center of Copenhagen, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Børsen in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 56 m
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
56 m of Børsen, 15 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dragon-tail spire and lantern
The spire rises from an open columned lantern into four twisted dragon tails, the finest part of the model. Print friendly adapts the thin tails and lantern supports; a larger print keeps them open.
- Long roof and repeated gables
Nine ornate gables line each long side of the steep roof, over two stories of repeated window bays. Use 0.12–0.16 mm layers so the gable edges and window relief stay sharp.
- One piece with the ground
Børsen is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Børsen takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Børsen
Børsen is a 17th-century commodity bourse that later served as a stock exchange, in the center of Copenhagen, Denmark. It stands next to Christiansborg Palace, where the Danish Parliament meets, on the island of Slotsholmen. It was built under Christian IV between 1619 and 1640, and is considered a leading example of Dutch Renaissance design in Denmark. The building is protected for conservation.
Christian IV planned the bourse to strengthen Copenhagen's position as a center of trade in Northern Europe. He first gave the design to Lorenz van Steenwinckel, and after his death the work passed to his brother Hans van Steenwinckel. Construction began in 1620 and was largely finished in 1624, though the spire followed in 1625, and the east gable's details were finished in 1640. Its best-known feature was a spire formed from four dragons' tails wound together, reaching 56 meters (184 ft).
The ground floor held 40 trading offices, with one large room above. In 1647 Christian IV sold it to Jacob Madsen, a merchant, for 50,000 Danish rigsdaler. Later, Frederick III bought it back from Madsen's widow. On April 16, 2024, a fire broke out during renovation work and toppled the spire.
About this model
Børsen is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
