A white 3D print of Bari Cathedral, a long Romanesque church with a tall square bell tower and rounded domed roofs, packed in among low buildings.

3D print Bari Cathedral

A free, printable model of Bari Cathedral, a long church with a tall square bell tower and domed roofs, packed in among the low buildings of Bari, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Bari Cathedral model, North view North
  • Bari Cathedral model, East view East
  • Bari Cathedral model, South view South
  • Bari Cathedral model, West view West

© OpenStreetMap contributors

The model you print

Bari Cathedral in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
19 mm
Scale
1:3,750

19 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slim bell tower

    The square bell tower rises well above the nave and ends in a pointed cap. Slow printing with good cooling helps the top, and a 0.12–0.16 mm layer height keeps its windows crisp.

  2. Bands of small arches

    A band of small arches runs along the long walls, and a round window sits in the front. Full detail keeps them on a larger print; Print friendly adapts them to the print scale.

  3. One piece with the ground

    Bari Cathedral is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bari Cathedral takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Bari Cathedral

Bari Cathedral, also known as the Cathedral of Saint Sabinus, serves the city of Bari in Apulia, in the south of Italy. The Archbishop of Bari-Bitonto has his seat here. Its dedication is to Saint Sabinus, who was bishop of Canosa; his relics reached Bari in 844. It is senior to Apulia's Basilica of St Nicholas, though less famous.

Builders worked on the present church from the late 12th century to the late 13th century, most of it in the final thirty years of the 12th. It rose where the Imperial Byzantine cathedral lay in ruins after William I of Sicily destroyed it in 1156, reusing material from the earlier church and from other destroyed buildings. The new cathedral was consecrated on October 4, 1292, following the Basilica of St. Nicholas in style.

In style, it is a significant example of Apulian Romanesque. Below a rose window, the plain facade opens through three portals of the 11th century, and a lintel above carries carved monsters and fantastic beasts. The campanile was rebuilt from stone similar to the original and has an elaborate lantern tower, with the dome of the cupola showing clear Moorish motifs. Inside, three aisles are divided by arcades of sixteen columns. In the 18th century the facade, nave and crypt were refurbished in Baroque style, and in the 1950s the interior was restored to its original Romanesque appearance.

About this model

Bari Cathedral is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits