3D print the Basilica di Santo Stefano Maggiore
A free, printable model of the Basilica di Santo Stefano Maggiore in Milan, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 16 mm
- Scale
- 1:3,750
16 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bell tower and nave
A basilica with a bell tower and a long nave has small details along the facade. With Landmark detail on Print friendly, thin or small elements are adapted to the print scale; Full detail keeps every modeled feature for large prints.
- Layers for the facade
Use 0.12 to 0.16 mm layers to keep facade and tower detail crisp, and slow the print for the narrow upper stages.
- One piece with the ground
The Basilica di Santo Stefano Maggiore is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Basilica di Santo Stefano Maggiore takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Basilica di Santo Stefano Maggiore
The Basilica di Santo Stefano Maggiore, a church in Milan, Italy, was established in the 5th century. It was first dedicated to Saint Zechariah and Saint Stephen; later to Saint Stephen alone. Other names are St. Stephen in Brolo, from the old name of the district, and St. Stephen's Gate, after a postern of Santo Stefano that no longer exists. The first church was built about 417 at the initiative of Martinianus, then the future bishop; it burned down in 1070 and was given a Romanesque rebuilding in 1075.
Duke Galeazzo Maria Sforza was assassinated in the basilica on December 26, 1476, while attending the patron saint's celebration. The painter Michelangelo Merisi, who is better known as Caravaggio, was baptized there on September 30, 1571; a baptismal certificate found in February 2007 confirmed it. From 1594 a series of works followed: the apse and main altar were enlarged in the early 17th century, the nave was lengthened and the facade rebuilt in the mid 17th century, and the bell tower was rebuilt by the architect Gerolamo Quadrio of Lugano after a collapse in 1642. A sacristy followed in the early 18th century, and some chapels were modernized in the early 19th century.
About this model
The Basilica di Santo Stefano Maggiore is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
