A white 3D print of the Basilica of San Zeno, Verona, a long church with a tall bell tower, standing among surrounding streets and buildings with open ground and green space beside it.

3D print the Basilica of San Zeno, Verona

A free, printable model of the Basilica of San Zeno and the streets, buildings and open ground around it in Verona, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Basilica of San Zeno, Verona model, North view North
  • Basilica of San Zeno, Verona model, East view East
  • Basilica of San Zeno, Verona model, South view South
  • Basilica of San Zeno, Verona model, West view West

© OpenStreetMap contributors

The model you print

Basilica of San Zeno, Verona in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
19 mm
Scale
1:3,750

19 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tall bell tower

    The slender bell tower is the most delicate part of this model. Print slowly with good cooling, and use a 0.12–0.16 mm layer height to keep its top crisp.

  2. Long nave roof and façade details

    The long roofline and small façade details survive best at larger print sizes. Landmark detail set to Full detail keeps every modeled feature; Print friendly adapts thin parts to the print scale.

  3. One piece with the ground

    The Basilica of San Zeno, Verona is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Basilica of San Zeno, Verona takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Basilica of San Zeno, Verona

The Basilica of San Zeno goes by the names San Zeno Maggiore and San Zenone as well. It is a Catholic place of worship in Verona, in the district named San Zeno, and counts among the masterpieces of medieval architecture. The existing building stands on ground where at least five earlier religious buildings had stood. Its beginnings appear to trace back to a church built above Saint Zeno of Verona's tomb. Zeno died sometime between 372 and 380.

Early in the 9th century the church was rebuilt at the urging of Bishop Ratold and Pepin, King of Italy, who thought a poor church unsuitable for the patron saint's remains. It was consecrated on December 8, 806. Magyar invasions damaged it badly, and in 967 Bishop Ratherius promoted a new reconstruction. Toward the end of the 11th century a major Romanesque renewal got under way; the 1117 Verona earthquake interrupted it, yet much of the present building stood complete by about 1138.

Its works of art include Andrea Mantegna's San Zeno Altarpiece, bronze panels on the portal, and a large rose window on the facade known as the "Wheel of Fortune," made by the stonecutter Brioloto de Balneo. The basilica inspired poets including Dante Alighieri and Heinrich Heine. It was raised to minor basilica in 1973. Tradition says that Romeo and Juliet, in Shakespeare's play, were wed in its crypt.

About this model

The Basilica of San Zeno, Verona is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Verona

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits