A white 3D print of the Torre dei Lamberti, a tall slender tower with an open belfry and a pointed top, rising above a dense cluster of surrounding buildings.

3D print the Torre dei Lamberti

A free, printable model of the Torre dei Lamberti, a tall slender tower with an open belfry, rising above the dense buildings of Verona, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Torre dei Lamberti model, North view North
  • Torre dei Lamberti model, East view East
  • Torre dei Lamberti model, South view South
  • Torre dei Lamberti model, West view West

© OpenStreetMap contributors

The model you print

Torre dei Lamberti in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
84 m
On a 160 mm print
23 mm
Scale
1:3,750

84 m of the Torre dei Lamberti, 23 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. A tall, slender shaft

    The tower is a narrow column that rises far above its neighbors in the model. Print it slowly with good cooling, and a layer height of 0.12-0.16 mm keeps the vertical lines clean.

  2. Open belfry arches

    The belfry near the top has thin arched openings and a pointed roof. Full detail keeps them on a larger print; Print friendly adapts them on a small one.

  3. One piece with the ground

    The Torre dei Lamberti is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Torre dei Lamberti takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Torre dei Lamberti

The Torre dei Lamberti is a tower in Verona, in northern Italy, that stands 84 m high. Construction began in 1172. In May 1403 lightning struck its top, but repairs did not start until 1448. That work took 16 years, and the tower was enlarged in the process. The newer sections can be told apart by their different materials, such as marble. The tower is built of brick and stone.

The prominent clock followed in 1779. The tower holds two bells. The Marangona sounds alarms for fires and marks work times as well as the hours of the day. Rengo, the larger bell, called people to arms and gathered the city councils, and it did so during the revolt known as Veronese Easter in 1797.

About this model

The Torre dei Lamberti is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Verona

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits