3D print the Basilica of St. Peter and St. Paul, Prague
A free, printable 3D model of Prague's Vyšehrad basilica, inside the fortress with its park and cemetery, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 58 m
- On a 160 mm print
- 16 mm
- Scale
- 1:3,750
58 m of the Basilica of St. Peter and St. Paul, Prague, 16 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin spires and finials
This is a tall, vertical church whose twin towers carry the silhouette. Print larger, or use Full detail on a fine nozzle, if you want the upper detail to read; Print friendly adapts the smallest parts.
- One piece with the ground
The Basilica of St. Peter and St. Paul, Prague is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Basilica of St. Peter and St. Paul, Prague takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Basilica of St. Peter and St. Paul, Prague
Dedicated to St. Peter and St. Paul, the church stands inside Prague's Vyšehrad fortress. It is collegiate and parish, and was built in neo-Gothic style. King Vratislaus II of Bohemia founded a Romanesque basilica there in 1070–1080; it burned in 1249 and was rebuilt in Gothic and later neo-Gothic style. A stone mosaic sits above the entrance, and the twin 58 m towers stand on a hill and can be seen from along the Vltava River. Pope John Paul II elevated the church to basilica in 2003.
The present building was constructed between 1887 and 1903. Joseph Mocker began as master builder but died during the work, and his partner František Mikš completed it, changing the facade and tower designs. The interior combines a nave, two side aisles, a choir, sanctuary and apse; there is no transept. Pointed windows with stained glass light a cross-vaulted ceiling, while the west front has three vestibules, two towers and a triangular gable.
Behind the church lie a large park and the Vyšehrad cemetery, where many notable Czechs are buried, among them the writer Karel Čapek and the composer Antonín Dvořák. The spires of the towers are hollow, pierced with slender openings and edged with petal-like finials. The main portal shows Jesus with his apostles, and the archangel Michael appears below them.
About this model
The Basilica of St. Peter and St. Paul, Prague is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
