A white 3D print of the Beijing National Aquatics Center (Water Cube), a large flat-topped box covered in a bubble-cell pattern, standing on open ground with roads and a few low buildings around it.

Beijing National Aquatics Center (Water Cube) in 3D

The Beijing National Aquatics Center (Water Cube) appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Beijing National Aquatics Center (Water Cube) model, North view North
  • Beijing National Aquatics Center (Water Cube) model, East view East
  • Beijing National Aquatics Center (Water Cube) model, South view South
  • Beijing National Aquatics Center (Water Cube) model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Beijing National Aquatics Center (Water Cube) may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

Real height
31 m
On a 160 mm print
11 mm
Scale
1:3,750

31 m of the Beijing National Aquatics Center (Water Cube), 11 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Bubble-cell walls and roof

    The model is a flat-topped box covered in a pattern of small irregular cells. Print friendly simplifies the shallow ridges between cells for small prints; Full detail keeps them, best at a larger size and a 0.12 mm layer height.

  2. Flat roof with small bumps

    Small round bumps are scattered across the roof. A larger print size keeps them distinct, and a finer layer height gives the cell edges on the roof a cleaner look.

  3. One piece with the ground

    The Beijing National Aquatics Center (Water Cube) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Beijing National Aquatics Center (Water Cube) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Beijing National Aquatics Center (Water Cube)

The Water Cube, which is also called the National Aquatics Centre, is a venue for swimming on the Olympic Green in Chaoyang, Beijing. It was first built for the aquatics competitions of the 2008 Summer Olympics and Paralympics, where it staged diving, swimming and synchronized swimming. Athletes broke 25 world records there during those Games. A renovation finished in July 2010 added a public water park of 12,000 m² (130,000 sq ft), and curling was held here at the 2022 Winter Games and Paralympic Games.

A consortium of PTW Architects, the Arup engineering group, CSCEC and CCDI designed and built it, and its design was picked from 10 proposals in July 2003. The Chinese partners favored a square, while the Sydney-based partners proposed covering the cube with bubbles to stand for water. Despite its name, the building is really a rectangular box that is 31 meters (102 ft) high and 178 meters (584 ft) on each side. It held 17,000 people during the Games.

A steel space frame carries the cladding, and the building is the biggest structure covered in ETFE anywhere, with over 100,000 m² of ETFE pillows only 0.2 mm thick. The outer wall follows the Weaire–Phelan structure, which comes from the pattern of bubbles in soap lather. The exterior has 4,000 ETFE bubbles, some as wide as 9.14 meters (30 ft), in seven sizes on the roof and 15 on the walls.

About this model

The Beijing National Aquatics Center (Water Cube) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Beijing

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits