3D print Beograđanka
A free, printable model of Beograđanka, the tall high-rise with an antenna mast, and the dense surrounding streets and buildings of Belgrade, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Beograđanka in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 101 m
- On a 160 mm print
- 38 mm
- Scale
- 1:3,750
101 m of Beograđanka, 38 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin antenna mast on the roof
A slim antenna group stands on top of the flat crown. Print friendly adapts thin parts like these to your print scale; print slowly so the tall tip stays steady.
- Fine vertical fins and bays
The tower's sides are cut into many narrow bays and vertical members. A layer height of 0.12–0.16 mm keeps them crisp, and a larger print keeps more of them.
- One piece with the ground
Beograđanka is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Beograđanka takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Beograđanka
Beograđanka, written Београђанка in Serbian Cyrillic and meaning Belgrade Lady, is officially called Belgrade Palace. It is a modern high-rise in downtown Belgrade, 101 m (331 ft) tall, and it counts among the symbols of Belgrade. It also represents the golden age of Belgrade's development during Branko Pešić's term as mayor from 1965 to 1974. The building stands where Kralja Milana, Resavska and Masarikova Streets meet, on the territory of the Savski Venac municipality.
The house of Jeremija Milivojević, a one-floor corner house built on the site in 1890, had stood there until the mid-1960s, when it was demolished. Construction of the tower began in 1969; it opened on April 22, 1974. The mayor of Belgrade and the architect shared a name, Branko Pešić, and both came from Zemun. The architect designed the building. Digging the foundation uncovered ten strong water springs, all of which were eventually channeled into the city sewage system.
The tower part has 24 stories, and for decades an observation deck operated on the 22nd floor. The facade is made of aluminum drapes and double-paned thermopane glass imported from Italy. City leaders chose the darker of two color options, because it was of higher quality, though not everyone welcomed the choice. The facade covers 11,500 m2, and the building's total floor area is 40,000 m2.
About this model
Beograđanka is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
