3D print Bergenhus Fortress
A free, printable model of Bergenhus Fortress in Bergen, centered on a long hall with stepped gables, with water, roads and green grounds around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Bergenhus Fortress in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stepped gables and battlements
The stepped gable ends and the row of small battlement teeth along the roofline are fine details. Print friendly adapts them to the print scale; Full detail suits larger prints.
- Pointed windows in relief
Rows of pointed-arch windows are modeled as shallow relief on the long walls. A layer height of 0.12-0.16 mm keeps them crisp, and a bigger print size keeps more of them.
- One piece with the ground
Bergenhus Fortress is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bergenhus Fortress takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Bergenhus Fortress
Bergenhus Fortress stands at the entrance to Bergen harbor in Norway. Among Norway's oldest and best preserved stone fortifications, it has buildings from as early as the 1240s and additions from World War II. In medieval times the area was named Holmen. It held a Dominican monastery, the bishop's residence, several churches, a cathedral and the royal residence in Bergen.
Haakon's Hall, built around 1260 in the Gothic style, is a medieval stone hall that counts as Norway's largest secular medieval building. Only this hall and a defensive tower from around 1270 survive from the medieval buildings. In the 1560s that tower was absorbed into a bigger structure, known as Rosenkrantz Tower. Fire destroyed the hall's wooden roof on April 20, 1944; after a second restoration it reopened on September 11, 1961.
Bergen was Norway's capital in the 13th century, until 1299, and Holmen served as the main seat of the country's rulers. Under Danish rule, Holmen turned into a purely military fortification, and the churches were demolished between 1526 and 1531. From about then, the name Bergenhus was in use. In the 19th century, the fortress stopped serving as a defense. Haakon's Hall is used occasionally for concerts and for banquets.
About this model
Bergenhus Fortress is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline



