3D print St Mary's Church, Bergen
A free, printable model of St Mary's Church, Bergen, a long church with two tall square towers, and the buildings, road and green patches around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St Mary's Church, Bergen in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin towers with pointed tops
Both towers rise to slim pointed roofs with tiny tips. Print friendly adapts these thin tips to the print scale; Full detail keeps them and suits a larger print. Printing the towers slowly helps.
- One piece with the ground
St Mary's Church, Bergen is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St Mary's Church, Bergen takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St Mary's Church, Bergen
St Mary's Church stands in Bryggen, a part of central Bergen, Norway, and serves as a parish church for the Church of Norway. The large, gray stone church has two towers and three naves and is mainly Romanesque in style, although the choir's eastern end shows some Gothic influence. It is built mainly of soapstone, with the oldest parts in the highest quality stone.
Building work is thought to have begun in the 1130s or 1140s and ended around 1180. That makes it the oldest surviving building in all of Bergen. It is the sole survivor among the twelve churches and three monasteries built in Bergen up to the end of the twelfth century. After the fire of 1248, the towers were raised higher and the chancel was extended.
The church was built for the Norwegian population of Bergen, but the city's large German population took it over in 1408, and it was popularly known as "the German church" (Tyskekirken). It became an ordinary parish church again in 1874. In 1814 it served as a polling station for the elections to the assembly that wrote the Constitution of Norway. The architect Christian Christie oversaw a major restoration from 1863 to 1876.
About this model
St Mary's Church, Bergen is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline



