A white 3D print of Fantoft Stave Church, a stepped-roof wooden church with a slim spire, on a wooded slope beside a road with buildings behind.

Fantoft Stave Church in 3D

Fantoft Stave Church appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Fantoft Stave Church model, North view North
  • Fantoft Stave Church model, East view East
  • Fantoft Stave Church model, South view South
  • Fantoft Stave Church model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Fantoft Stave Church may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dragon heads on the gables

    The thin curved gable ornaments and the slim spire on top are the most delicate parts. Use Print friendly, or Full detail at a larger print size with a fine nozzle and 0.12-0.16 mm layers.

  2. Stacked roofs and small arches

    The church has several stepped roof tiers and a row of small arches along its base. A larger print size keeps these details readable.

  3. One piece with the ground

    Fantoft Stave Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Fantoft Stave Church takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Fantoft Stave Church

Fantoft Stave Church is a reconstructed stave church in the Fana borough of Bergen, in Vestland county, Norway. The original was built about 1150 at Fortun, a village near the inner end of the Sognefjord. A new church was constructed at Fortun in 1879 to take its place, and the medieval building was at risk of being pulled down, like hundreds of other stave churches across Norway.

Consul Fredrik Georg Gade bought the church in 1883 and saved the building by taking it apart and moving it to Fana, near Bergen. A stone cross that comes from Tjora, in Sola Municipality, stands beside the church. Arson destroyed the church on June 6, 1992, and at first lightning or an electrical failure was blamed for the fire. Rebuilding began soon afterward and lasted six years, and a security fence has surrounded the site since 1997.

About this model

Fantoft Stave Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Bergen

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits