A white 3D print of Brann Stadion, with three separate roofed stands around an open pitch and the surrounding streets and buildings of Bergen.

3D print Brann Stadion

A free, printable model of Brann Stadion, with three separate roofed stands around an open pitch and the surrounding streets and buildings of Bergen, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Brann Stadion model, North view North
  • Brann Stadion model, East view East
  • Brann Stadion model, South view South
  • Brann Stadion model, West view West

The model you print

Brann Stadion in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Open terraces and roof trusses

    The model keeps the pitch open between three separate stands, with exposed triangular roof trusses above stepped seating. Full detail preserves the truss webs and terrace rows; Print friendly groups them at small sizes.

  2. Thin cantilever roof edges

    The thin roof sheets and projecting canopy edges are the most slender parts of the print. A larger print or 0.12 to 0.16 mm layers helps them read cleanly.

  3. One piece with the ground

    Brann Stadion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Brann Stadion takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Brann Stadion

Brann Stadion is a football ground in Bergen, Norway. It was built in 1919 and has been Brann's home ground ever since. The ground sits at the foot of Mount Ulriken, 3 km (1.9 mi) to the south of the city center. It was built at Fridalen in the Årstad borough.

The record attendance is 24,800, set on October 1, 1961, when Brann hosted Fredrikstad in a cup semi-final. The league record is 23,900, set in 1978 against Lillestrøm. The stadium has a capacity of 17,950, and its attendance capacity is the third largest in Norway.

The first match there, on May 25, 1919, pitted Brann against the Norwegian national team. The Main Stand dates from the 1930s and has been expanded at both ends over the years, and the north side gained a roofed tier in 1978. Seventeen international games have been played there since 1933. It also hosted three Norwegian Cup finals between 1922 and 1947.

About this model

Brann Stadion is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print