3D print the Berlin Mosque
A free, printable model of the Berlin Mosque in Wilmersdorf, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 27 m
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
27 m of the Berlin Mosque, 7 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Two slender minarets
Tall, thin minarets are the parts most likely to lose detail at small sizes; print larger and use 0.12–0.16 mm layers, and slow the print near the top.
- Dome and fine details
For a dome and small decorative details, Full detail suits a large print, while Print friendly adapts the finest parts to the print scale.
- One piece with the ground
The Berlin Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Berlin Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Berlin Mosque
Officially the Wilmersdorfer Mosque, the Berlin Mosque occupies a site on Brienner Straße in Berlin's Wilmersdorf borough. A small wooden structure outside Berlin came before it and was destroyed in 1923. K. A. Hermann designed the mosque, and construction ran from 1923 to 1925. The foundation stone was laid on August 6, 1923, and the mosque was officially inaugurated on April 26, 1925. The Lahore Ahmadiyya Movement owns and runs it.
Completed in a Neo-Mughal style, the mosque has an onion dome and pastel colors, and it resembles the tombs of the Mughal Empire; its symmetry also reflects the Taj Mahal. Two minarets rise 27 m (90 ft). World War II left them badly damaged, and both were rebuilt from 1999 to 2001. The mosque reopened in 1952 with help from a grant by the Berlin Monuments Department, and a two-story residence for the imam stands next to it.
About this model
The Berlin Mosque is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
