3D print Bethany Chapel
A free, printable model of a small chapel with a steeple, set among houses on a green hillside, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Steeple on a small chapel
The steeple is thin and the whole chapel is small. Print friendly adapts thin parts to the print scale; Full detail keeps them on a larger print. A larger print and a slow, well-cooled tip help.
- One piece with the ground
Bethany Chapel is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bethany Chapel takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Bethany Chapel
Bethany Chapel is also called the Hamburg Presbyterian Church. Its address is 103 Hamburg Turnpike, and Hamburg is a borough in Sussex County, New Jersey. The chapel was built in 1869. The National Register of Historic Places listed it on February 29, 1980, citing its importance for architecture and religion.
The church was built in 1869 using random coursed stone. Two transepts were added to it in 1879, and the bell tower and steeple came in 1884. All of these sections show the rural Gothic Revival style.
About this model
Bethany Chapel is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
