A white 3D print of the Bhutanatha group of temples, Badami, a tiered tower beside a pillared hall on a shoreline, with water around it.

3D print the Bhutanatha group of temples, Badami

A free, printable model of the Bhutanatha group of temples, a tiered sanctum tower beside a pillared hall on a shoreline, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Bhutanatha group of temples, Badami model, North view North
  • Bhutanatha group of temples, Badami model, East view East
  • Bhutanatha group of temples, Badami model, South view South
  • Bhutanatha group of temples, Badami model, West view West

© OpenStreetMap contributors

The model you print

Bhutanatha group of temples, Badami in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
3 mm
Scale
1:3,750

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tiered tower and finial

    The stepped tower ends in a small dome and finial. Print friendly adapts the thin top to the print scale; slow printing with good cooling helps the tip hold its shape.

  2. Dense small detail

    Rows of small blocks and pillars cover the roofs and porch. Full detail keeps them on a larger print, and a 0.12–0.16 mm layer height keeps them sharp.

  3. One piece with the ground

    The Bhutanatha group of temples, Badami is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Bhutanatha group of temples, Badami takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Bhutanatha group of temples, Badami

The Bhutanatha group of temples consists of Hindu temples from the 7th to 12th century, in Badami, Karnataka state, India, east of Agastya lake. It forms two subgroups. The East Bhutanatha, or main, group dates from the 7th to 8th century and is mostly in the Dravida style, while the North Bhutanatha, or Mallikarjuna, group dates from the 11th to 12th century and is mostly in the Nagara style.

The older set of shrines is the main group, dated 700–725 CE. Its oldest temple is the large main temple, with a hall (gudha-mandapa) supported by four massive central pillars, leading into a smaller sanctum, square in plan, that holds a Shiva linga. Above the sanctum rises a three-storey Dravida-style superstructure, each higher storey repeating the same elements in a smaller form. A square vedi and a short shikhara complete it.

On either side of the shrine doorway are images of the goddesses Ganga, on her vehicle the makara, and Yamuna, riding the tortoise. An inscription on the outer wall records a gift from a Paingara family and can be dated to roughly the late 9th century. Four Shaiva reliefs on a boulder to the east are from the late 7th century or the early 8th. The Mallikarjuna group, on the north side of the manmade lake, has temples with pyramidal superstructures in the Nagara style.

About this model

The Bhutanatha group of temples, Badami is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits