3D print the Bohoniki Mosque
A free, printable model of the Bohoniki Mosque, a small hip-roofed building with an onion-domed turret and a porch, with the grass and roads around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Bohoniki Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Onion dome and thin spire
A small onion-shaped dome carries a thin spire. Print friendly adapts thin parts to the print scale; Full detail keeps them on a larger print, and printing slowly helps.
- One piece with the ground
The Bohoniki Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Bohoniki Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Bohoniki Mosque
Bohoniki Mosque, Meczet w Bohonikach in Polish, is a wooden mosque in Bohoniki, a village in Podlaskie Voivodeship in northeastern Poland. It was most likely built in 1873, after a fire burned down an earlier mosque of Tatar settlers on the same spot. That earlier mosque stood beside a historic cemetery in the village's eastern part, which has existed since around the eighteenth century, or possibly the seventeenth.
In World War II the Wehrmacht destroyed the mosque and made the building a field hospital. From 1945 on, it went through numerous small renovations. There were plans to expand it, but the conservator did not allow them to go ahead. In 2003 the sheet tin roof was replaced with shingle, and in 2005 the mosque underwent a major refurbishment. The mosque belongs to the Tatar mosques of the region. Related Lipka Tatar mosques include the Kruszyniany Mosque in Poland, the Raižiai Mosque in Lithuania and the Navahrudak Mosque in Belarus.
About this model
The Bohoniki Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





