A white 3D print of Bolzano/Bozen railway station, a long low building with a clock tower and a columned entrance beside a wide spread of railway tracks, with a park and city buildings nearby.

Bolzano/Bozen railway station in 3D

Bolzano/Bozen railway station appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Bolzano/Bozen railway station model, North view North
  • Bolzano/Bozen railway station model, East view East
  • Bolzano/Bozen railway station model, South view South
  • Bolzano/Bozen railway station model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Bolzano/Bozen railway station may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
10 mm
Scale
1:3,750

10 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Clock tower and long colonnade

    The clock tower is slim, and the track side has a long row of thin columns. Use Full detail on a larger print to keep them, or Print friendly to thicken them at small sizes.

  2. One piece with the ground

    Bolzano/Bozen railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bolzano/Bozen railway station takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Bolzano/Bozen railway station

Bolzano/Bozen railway station, called Stazione di Bolzano in Italian and Bozen Bahnhof in German, is the main station of Bolzano, the capital of South Tyrol, an autonomous province in northeastern Italy. The Südbahn of the Austrian Empire opened it on May 16, 1859. It serves the trans-Alpine Brenner Railway and is where a branch line to Merano ends. The station sits at Piazza della Stazione / Bahnhofplatz, on the southeastern edge of the city center, 5 minutes on foot from it. Six platforms handle passengers, and extra tracks carry freight.

The station opened with the completion of the Trento-Bolzano stretch of the Brenner Railway, and was first called Bozen-Gries Bahnhof. Sebastian Altmann, an architect from Bolzano, designed its passenger building. The last stretch of the Brenner Railway, from Bolzano to Innsbruck, was finished on August 24, 1867. The Puster Valley Railway reached the station in 1871, and the Vinschgau railway joined it in 1881. From 1898 until 1974 trains of the Überetsch Railway ran from here to Kaltern an der Weinstraße.

After the First World War, the Saint-Germain-en-Laye treaty of 1919 handed Italy the part of the County of Tyrol south of the Brenner Pass, and the station joined the Italian railway network. Between 1927 and 1929 a new station building in the fascist-regime style of Italy replaced the old one, designed by Angiolo Mazzoni. Its facade on the access road was given two half-columns, with a statue on each side by the Austrian artist Franz Ehrenhöfer, representing electricity and steam.

About this model

Bolzano/Bozen railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits