3D print the Casimir Palace
A free, printable model of the Casimir Palace, a wide palace with a long facade, a hipped roof and a columned portico, among the buildings along Warsaw's Royal Route, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Hipped roof and end pavilions
The model has a long hipped roof with raised end pavilions. Print friendly adapts the small roof steps; a larger print keeps the pavilions and roof ridges clear.
- Portico columns and pediment
A columned portico with a triangular pediment projects from the front. Use 0.12–0.16 mm layers so the thin columns stay crisp, and print slowly for the overhanging roof edges.
- One piece with the ground
The Casimir Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Casimir Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Casimir Palace
The Casimir Palace, formerly Villa Regia, is a reconstructed palace in Warsaw, Poland, next to the Royal Route on Krakowskie Przedmieście at number 26/28. King Władysław IV had it built in 1637–41 as a suburban villa in the mannerist-early Baroque style, designed by the Italian architect Giovanni Trevano. The rectangular building had corner towers, a loggia facing its garden, and two gardens with sculptures.
King John II Casimir, whose name it carries, had the palace remodeled in 1660. Fire destroyed it in 1695. It was rebuilt in 1737–39 for Count Aleksander Józef Sułkowski, when it gained mansard roofs, and Domenico Merlini remodeled it again in 1765–68 for the Corps of Cadets under King Stanisław II Augustus. From 1816 it was the intermittent seat of Warsaw University, and during World War II it suffered in the 1939 defense of Warsaw and again in the 1944 Warsaw Uprising.
After the war the palace was rebuilt between 1945 and 1954 to a design by Piotr Biegański, and the campus reconstruction was completed in 1960. It houses the Warsaw University rectorate and a museum of the university's history. The building was revitalized in 2006 with some funding from the European Union.
About this model
The Casimir Palace is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
