3D print the Belweder
A free, printable 3D model of the Belweder in Warsaw, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low palace block
The palace is a low, wide block. At the default size, Print friendly adapts the smallest parts; a larger print keeps the facade and roof edges crisp.
- One piece with the ground
The Belweder is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Belweder takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Belweder
The Belweder is a palace in Warsaw, Poland, in the neoclassical style. Buildings have stood on this site since 1660, and the palace was remodelled in the early 1800s; it stands south of the city center near the historic Royal Baths Park, Łazienki. It is one of the official residences available to Polish presidents and also serves as a state guest house for official visits by heads of state.
Poland's last king, Stanislaus Augustus, once owned it and used it as a porcelain factory. Grand Duke Constantine Pavlovich made it his home from 1818 and served in effect as viceroy of the Congress Kingdom of Poland. After independence in 1918, Marshal Józef Piłsudski made it his residence and died there in 1935. The palace was extensively remodelled during World War II for Hans Frank and is one of Warsaw's few original buildings to come through the war. From 1945 to 1952 it housed Bolesław Bierut. Poland's presidents used it as their official home from 1989 until July 1994.
About this model
The Belweder is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
