3D print the Çelebi Sultan Mehmed Mosque
A free, printable model of the Çelebi Sultan Mehmed Mosque, a square building with a pyramid roof and a slim minaret, among the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Çelebi Sultan Mehmed Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A slender minaret with balconies
The tall, thin minaret with its two balconies is the most fragile part of this model. Print slowly with good cooling, and use a layer height of 0.12–0.16 mm to keep it crisp.
- Fine door and window frames
The walls carry small arched windows and a carved doorway. A larger print keeps them readable; Print friendly adapts them to the scale, while Full detail keeps all of them.
- One piece with the ground
The Çelebi Sultan Mehmed Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Çelebi Sultan Mehmed Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Çelebi Sultan Mehmed Mosque
The Çelebi Sultan Mehmed Mosque also goes by the names Bayezid Mosque and Great Mosque. It is a former mosque in Didymoteicho, far in the northeast of Greece, within the region of East Macedonia and Thrace. According to the 17th-century Ottoman traveler Evliya Çelebi, it was begun under Sultan Bayezid I, but work stopped when he died at the Battle of Ankara. Construction resumed under Sultan Mehmed I, and the mosque was finished and opened in March 1420, according to the inscription over the main entrance.
Another inscription, above a side door, names Ivaz ibn Bayezid as architect, Dogan ibn Abdullah as builder and donor, and Seyid Ali, the local qadi, as supervisor of construction. The building is a square, about 30 to 32 meters (98 to 105 ft) per side, measured with the walls. It was built using cast stone and faced in limestone ashlar, with outer walls roughly 2.2 meters (7 ft 3 in) to 2.7 meters (8 ft 10 in) thick. The south side holds the main entrance.
Its layout suggests the building was first meant to carry two large domes flanked by two smaller ones. That plan was abandoned in favor of a lead-covered wooden roof shaped like a four-sided pyramid. The minaret stands at the south-eastern corner. Its upper part was demolished in 1912 and rebuilt in 1913. Greek government officials consider the mosque among the most important Muslim monuments in Europe, and among the oldest mosques on European soil.
About this model
The Çelebi Sultan Mehmed Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





