3D print Centennial Hall (Wrocław)
A free, printable model of Centennial Hall in Wrocław, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Centennial Hall (Wrocław) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 42 m
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
42 m of Centennial Hall (Wrocław), 12 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stepped dome and terraces
The roof rises in stepped circular window tiers to a shallow lantern cap. Print friendly simplifies the narrow glazing piers; 0.12–0.16 mm layers keep the terrace edges and dome steps crisp.
- West entrance portico
A rounded two-story portico with open columns and a taller recessed hall marks the west entrance, with a slender stair projection beside it. Print slowly for the thin columns and canopy edge.
- One piece with the ground
Centennial Hall (Wrocław) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Centennial Hall (Wrocław) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Centennial Hall (Wrocław)
The Centennial Hall, known in Polish as Hala Stulecia and in German as Jahrhunderthalle, is a historic multipurpose building in Wrocław, Poland. Max Berg designed it, and it was built in 1911–1913 to stage exhibitions, concerts, plays, opera and sporting events. It is an early landmark for reinforced concrete building.
The hall has a symmetrical quatrefoil plan around a large circular central space that seats 7,000 people. Its concrete dome spans 69 m (226 ft) inside and rises 42 m (138 ft), making it the largest building of its kind when completed. The upper dome, 23 m (75 ft) tall, is made of steel and glass, with a lantern at the center.
The hall opened on May 20, 1913, as part of celebrations marking the 100th anniversary of the Battle of Leipzig. It became a Polish national Historic Monument in 2005 and joined the UNESCO World Heritage list in 2006. Following a renovation in 2009–11 it can hold 10,000 people, and it has hosted events from EuroBasket to the World Weightlifting Championships.
About this model
Centennial Hall (Wrocław) is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
