A white 3D print of Wrocław Główny railway station, a long building with small towers and gabled wings and a ribbed arched train shed behind it, beside railway tracks and city blocks.

3D print Wrocław Główny railway station

A free, printable model of Wrocław Główny railway station, a long building with small towers and an arched train shed, with the tracks, platforms and city blocks around it, generated in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Wrocław Główny railway station model, North view North
  • Wrocław Główny railway station model, East view East
  • Wrocław Główny railway station model, South view South
  • Wrocław Główny railway station model, West view West

© OpenStreetMap contributors

The model you print

Wrocław Główny railway station in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Small corner towers

    Slim turrets with battlements rise at the corners and entrances. The Print friendly Landmark detail setting adapts them to the print scale; printing larger keeps more of them.

  2. Ribbed arched train shed

    The curved train-shed roof has thin ribs and slender columns at its end. Full detail suits larger prints or a fine nozzle, and a layer height of 0.12-0.16 mm keeps the ribs crisp.

  3. One piece with the ground

    Wrocław Główny railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Wrocław Główny railway station takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Wrocław Główny railway station

Wrocław Główny is the main passenger station of Wrocław, a city in southwestern Poland, at a junction of several major routes. It ranks as the biggest station in Lower Silesia Voivodeship, and by number of passengers served the biggest in Poland. It took over from the earlier Wrocław Górnośląski station.

Construction ran from 1855 to 1857. Trains of the Oberschlesische Eisenbahn, or Upper Silesian Railway, began here, as did a second route, Breslau to Glogau via Posen. The royal Prussian architect Wilhelm Grapow designed it. At first it had a single platform, yet the platform hall measured around 200 meters and counted among the biggest structures of its kind in Europe.

Five new platforms were started in 1899, four of them under a large roof, and every passenger platform stood elevated. The main hall's façade was remodeled between 1899 and 1904. The main gate is on Piłsudski street, north of the station, with a further entrance at each end of the main hall, and each platform has two subway exits to that hall. The station was extensively refurbished in 2010-2012 for the Euro 2012 championships.

About this model

Wrocław Główny railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits