3D print the Wrocław Town Hall
A free, printable model of the Wrocław Old Town Hall and the crowded blocks around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Wrocław Town Hall
The Old Town Hall of Wrocław (Polish: Stary Ratusz) stands in the middle of the city's Market Square. It is a Gothic building dating to the 13th century, commissioned and built by the city's mainly German population, and it counts among the main landmarks of the city.
Development lasted roughly 250 years, beginning at the close of the 13th century and ending in the middle of the 16th. A building of one storey, with cellars and a tower, was put up between 1299 and 1301, and an upper storey with rooms for the Council and the Aldermen followed between 1328 and 1333. Several rooms were added in a push between 1470 and 1510. The upper part of the tower was rebuilt in 1558-1559, the last phase of the main building campaign.
The town hall hosts concerts and other civic and cultural events, some in its Great Hall. Inside are the bourgeois museum and the Świdnicka Cellar, described as the oldest restaurant in Europe. The Little Bear statue was added in 1902. Late in World War II an aerial bomb pierced the roof without exploding, and restoration work began in the 1950s.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 18 mm | 1:3,750 |
| 200 mm | 23 mm | 1:3,000 |
| 256 mm | 29 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A slender clock tower
- A tall tower with a thin spire rises beside the main hall. Print friendly adapts the spire to the print scale; print slowly with cooling for tall thin parts.
- Gables and turrets
- Small turrets and stepped gables crowd the roofline. A larger print keeps more of them, and 0.12 to 0.16 mm layers keep them crisp.
- One piece with the ground
- The Wrocław Town Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Wrocław Town Hall takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Wrocław Town Hall is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Wrocław Town Hall STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Wrocław Town Hall grows with the print: about 18 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
