3D print Charing Cross railway station
A free, printable 3D model of Charing Cross railway station in London, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Charing Cross railway station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 16 mm
- Scale
- 1:3,750
16 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine edges on a station
A station has many small details that reward a larger print. Print friendly keeps thin parts sturdy, while Full detail suits a fine nozzle and a 0.12–0.16 mm layer height.
- One piece with the ground
Charing Cross railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Charing Cross railway station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Charing Cross railway station
Charing Cross is a terminus in central London, set between the Strand and Hungerford Bridge, within the City of Westminster. Its trains run on the Southeastern Main Lines that reach Dover through Ashford and Hastings through Tunbridge Wells. The South Eastern Railway opened it in 1864. The name comes from the nearby road junction Charing Cross, treated as the notional middle of London for measuring distances.
Sir John Hawkshaw designed the station, which had one wrought iron roof with a single span, 510 feet (155 m) in length and 164 feet (50 m) in width, above six platforms. At its highest point the arch reached 102 feet (31 m). Lucas Brothers built the station on a brick arched viaduct. Edward Middleton Barry designed the Charing Cross Hotel, which opened on May 15, 1865 and lent the station an ornate French Renaissance frontage.
Part of the roof and the western wall collapsed on December 5, 1905, and six people died. The station was extensively rebuilt after the collapse. Bombing in World War II hit it several times, and it was rebuilt again, reopening in 1951. In the late 1980s Terry Farrell redesigned the complex, which was rebuilt to include a modern office block called Embankment Place.
About this model
Charing Cross railway station is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
