3D print Château de Cheverny
A free, printable model of Château de Cheverny, a symmetrical building with domed corner pavilions, set in open grounds crossed by paths, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Château de Cheverny in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Domed cupolas and chimneys
Small cupolas crown the domed pavilions, and thin chimney stacks and dormers sit on the roofs. Print friendly adapts them to the print scale; Full detail keeps them on a larger print.
- Fine window and wall detail
The walls carry many shallow window frames and ornaments. A layer height of 0.12–0.16 mm keeps this detail crisp, and a bigger print shows more of it.
- One piece with the ground
Château de Cheverny is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Château de Cheverny takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Château de Cheverny
Château de Cheverny lies in Cheverny, in the Loir-et-Cher department of France, and counts among the châteaux of the Loire Valley. Philippe Hurault had it built between 1624 and 1630. The designs came from Jacques Bougier, a sculptor and architect from Blois who trained in the workshop of Salomon de Brosse, and his design echoes the Palais du Luxembourg in places. A daughter of Henri Hurault and Marguerite, the marquise de Montglas, completed the interiors by 1650, employing craftsmen from Blois.
An earlier house stood on these lands. Jaques, or his son Raoul, put it up at the start of the 16th century, and in 1510 Raoul applied to the king for permission to fortify it. Later the property was lost to the Crown over fraud against the State. King Henri II donated it to his mistress Diane de Poitiers, but she liked Château de Chenonceau better and sold Cheverny to the son of the former owner, Philippe Hurault. In 1802 the family sold the property, then bought it back in 1824. In 1914 the owner let the public visit the château, one of the first to do that.
On the ground floor, the central Grand Salon received its decoration at the direction of the marquise de Montglas. Decorated with carved trophies of arms and of the arts, a stone staircase leads up to the Grand Appartements. In the Chambre du Roi hang five Paris tapestries made after designs by Simon Vouet, depicting the story of Ulysses. Hergé, the Belgian comic creator, modeled Moulinsart, his fictional château known as Marlinspike Hall in English, on Cheverny for the Tintin books. There, the two outermost wings are absent, yet the central tower and the two wings beside it are nearly identical.
About this model
Château de Cheverny is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





