3D print the Checkerboard Inn
A free, printable model of the Checkerboard Inn, a long gabled house with two wings, set in open green land, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wings, dormer and chimneys
Two wings, a small dormer and tall chimneys break up the roofline. Print friendly adapts these small parts to the print scale; print larger with Full detail to keep the chimneys sharp.
- One piece with the ground
The Checkerboard Inn is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Checkerboard Inn takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Checkerboard Inn
Monroe, New York, is home to the Checkerboard Inn, a frame building from the late 18th century that stands on the grounds of Mansion Ridge Golf Club. It is also called the Forshee-Jenkins House. It was built as a house but within a decade was working as an inn, after the Orange Turnpike, which was an early toll road, opened in 1802. Local lore says an early owner painted the house in a black-and-white checkerboard to draw trade, though that has not been conclusively established.
The main block dates from between 1790 and 1810, built for a local farmer, Bernard Forshee. Its older section is five bays wide and one and a half stories high, with a Federal style entrance of fluted pilasters under an entablature and cornice. Brick chimneys stand at either end of the gabled roof, and the interior follows a center-hall plan.
Moses Charles Migel, a New York City silk merchant, bought the property in 1916. Two wings went up in the late 1940s for his son Richard and Richard's new family. A National Register of Historic Places listing came in 2006.
About this model
The Checkerboard Inn is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
