3D print the Stony Point District School No. 4
A free, printable model of Stony Point District School No. 4, a small one-story school with a belfry, and the grassy site and road around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Open belfry on the roof
The belfry is a small, open feature on the roof ridge. Print friendly adapts it to the print scale; Full detail on a larger print keeps its cross-bracing more visible.
- One piece with the ground
The Stony Point District School No. 4 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Stony Point District School No. 4 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Stony Point District School No. 4
Stony Point District School No. 4 goes by the name Pyngyp School as well. It is a historic school with a single room, close to Stony Point, in New York’s Rockland County. Built around 1915, it is a rectangular, wood-frame building of one story, and its detailing is modestly Gothic in style.
The school closed in 1945 and served as a community center afterward. A steeply pitched gable roof carries a belfry, and the building has two entry doors. A frame addition at the rear was constructed in the 1970s. The National Register of Historic Places listed it in 2012.
About this model
The Stony Point District School No. 4 is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
