3D print the Chiaravalle Abbey
A free, printable model of Chiaravalle Abbey, a Cistercian monastery in Milan, among surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 56 m
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
56 m of the Chiaravalle Abbey, 15 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine edges and openings
Small openings and thin roof edges print cleanly at 0.12–0.16 mm layers. A larger print preserves them; Print friendly adapts the smallest parts at the default size.
- Print speed for thin parts
The upper parts are the most delicate. Print slowly with good cooling, and choose Full detail for a large print or a fine nozzle.
- One piece with the ground
The Chiaravalle Abbey is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Chiaravalle Abbey takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Chiaravalle Abbey
Chiaravalle Abbey is a Cistercian monastery in the comune of Milan, in Lombardy, northern Italy. It was founded on January 22, 1135, as a daughter house of the abbey at Clairvaux, and it counts among Italy's earliest Gothic buildings, though some late Romanesque elements remain. The district around it was once an independent comune called Chiaravalle Milanese.
Bernard of Clairvaux, the first abbot and founder of Clairvaux, came to Milan in 1135 and chose a marshy area south of the city for the new monastery. Builders began the permanent church around 1150–1160 and consecrated it on May 2, 1221. Work continued with the first cloister in the 13th century, then, during the 14th, the crossing tower and refectory. In 1490 Cardinal Ascanio Sforza asked Bramante and Giovanni Antonio Amadeo to build the large cloister and chapterhouse.
The crossing tower, whose local dialect name is the Ciribiciaccola, begins at the dome area and rises through two octagonal sections to a final conical one, reaching 56.26 m at the cross tip. The church follows a Latin-cross layout, with a nave, two aisles, a flat apse and a crossing dome, and its interior preserves Baroque frescoes by the Della Rovere brothers, Giovan Battista and Giovan Mauro.
About this model
The Chiaravalle Abbey is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
