3D print the Town Hall Tower
A free, printable model of the Town Hall Tower and the surrounding streets and buildings of Kraków's Main Market Square area, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Town Hall Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 70 m
- On a 160 mm print
- 19 mm
- Scale
- 1:3,750
70 m of the Town Hall Tower, 19 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, delicate top
A tall tower with a roof at the top is delicate. Print friendly adapts thin parts to the print scale; a 0.12–0.16 mm layer height keeps vertical detail crisp.
- One piece with the ground
The Town Hall Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Town Hall Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Town Hall Tower
In Kraków's Old Town, the Town Hall Tower ranks among the main focal points on the Main Market Square. Nothing else survives of the old Kraków Town Hall, which was pulled down in 1820 under a city plan that aimed to open the Main Square up. Beneath the tower, the cellars were once a city prison, complete with a medieval torture chamber.
The massive Gothic tower is made of stone and brick, dating to the end of the 14th century, and it is 70 meters tall. A storm in 1703 left it leaning by only 55 centimeters. Lightning set the original Gothic helmet on fire in 1680. Between 1683 and 1686 the royal architect Piotr Beber oversaw the rebuilding and designed a new Baroque helmet, which lasted until 1783, when it started to crumble and a smaller structure took its place.
A pair of stone lions guards the entrance; they were carved early in the 19th century. Above the doorway, the original Gothic portal bears the emblem of Poland along with the city's coat of arms. A complex conservation that underlined its Gothic ancestry preceded 1967, when the Historical Museum of Kraków took over running the tower. Its top floor has an observation deck.
About this model
The Town Hall Tower is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
