3D print the Church of the Pater Noster
A free, printable model of the Church of the Pater Noster in Jerusalem, a long walled building with a square tower and an open arcaded hall, on its hillside with nearby roads and buildings.
-
North
-
East
-
South
-
West
The model you print
Church of the Pater Noster in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Open arcade behind the walls
Rows of thin arches show inside a roofless rectangle. Use Full detail for larger prints or a fine nozzle; at small sizes Print friendly keeps the arches printable.
- Square tower with a cross
The small cross on the tower roof is a thin vertical detail. Printing slowly with good cooling helps, and a layer height of 0.12-0.16 mm keeps it crisp.
- One piece with the ground
The Church of the Pater Noster is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of the Pater Noster takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of the Pater Noster
The Church of the Pater Noster is a Catholic church on the Mount of Olives, within Jerusalem. It forms part of a Carmelite monastery for cloistered nuns, a complex also called the Sanctuary of the Eleona. Beside it lie the ruins of the Church of Eleona, a Late Roman/Early Byzantine church of the 4th century; the ruins came to light again in the 20th century, and their walls were partly rebuilt.
Early in the 4th century a basilica was built here under the direction of Constantine I's mother Helena, and it stood intact until the Persian Sasanids destroyed it in 614. In 1106 the Crusaders put up a small oratory among the ruins, and in 1152 a full church. The 1187 siege of Jerusalem under Sultan Saladin damaged it badly, and by 1345 it lay in ruins.
Aurélie de la Tour d'Auvergne, a princess by marriage, built a cloister in 1868 and founded a Carmelite convent in 1872; the convent church went up in the 1870s. The 19th-century cloister takes the Camposanto Monumentale in Pisa, Italy, as its model. Walls of the cloister and both churches carry plaques with the Lord's Prayer in more than 100 languages and dialects.
About this model
The Church of the Pater Noster is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





