A white 3D print of the Mosque of Omar, a low building with a small dome and a slender minaret with a domed top, packed between taller neighboring buildings.

3D print the Mosque of Omar (Jerusalem)

A free, printable model of the Mosque of Omar in Jerusalem, a low building with a small dome and a slender minaret, packed among taller buildings and nearby domes, generated in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Mosque of Omar (Jerusalem) model, North view North
  • Mosque of Omar (Jerusalem) model, East view East
  • Mosque of Omar (Jerusalem) model, South view South
  • Mosque of Omar (Jerusalem) model, West view West

© OpenStreetMap contributors

The model you print

Mosque of Omar (Jerusalem) in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
5 mm
Scale
1:3,750

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender minaret

    The tall, thin minaret with a small domed top is the most delicate part. The Print friendly Landmark detail setting adapts it to the print scale; printing slowly with good cooling helps the top.

  2. Small among big neighbors

    The mosque is low and small beside taller buildings and large domes. A larger print size keeps its dome and details, and Full detail suits a fine nozzle.

  3. One piece with the ground

    The Mosque of Omar (Jerusalem) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mosque of Omar (Jerusalem) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Mosque of Omar (Jerusalem)

The Mosque of Omar lies in the Old City of Jerusalem, across from the southern courtyard of the Holy Sepulchre church, in the Christian Quarter's Muristan area. It was completed during the Ayyubid era. Its current structure dates from 1193, and its minaret is a later addition from the Mamluk period.

Local tradition says that in 637, following the siege of Jerusalem, Patriarch Sophronius would surrender only to Caliph Omar in person. Omar accepted the surrender but declined to pray inside the church, to avoid setting a precedent that would endanger its status as a Christian site. He prayed on the steps to the east instead. Later a mosque rose on that spot, as shown by a stone plate bearing a Kufic inscription that was found in 1897.

In 1193 Al-Afdal ibn Salah ad-Din, an Ayyubid sultan, gave the building its current shape, to mark the caliph Omar's prayer. The 15-meter-high (49 ft) minaret dates from the Mamluk period, before 1465, and perhaps came after the 1458 earthquake; the Ottoman sultan Abdulmecid I renovated it. The Al-Khanqah al-Salahiyya Mosque on the northern side of the church has a nearly identical minaret, put up in 1418.

About this model

The Mosque of Omar (Jerusalem) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Jerusalem

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits