3D print the Devon Energy Center
A free, printable model of the Devon Energy Center, with its faceted tower, rounded rotunda and stepped podium among the surrounding buildings of downtown Oklahoma City, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Devon Energy Center in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 257 m
- On a 160 mm print
- 71 mm
- Scale
- 1:3,750
257 m of the Devon Energy Center, 71 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Crown and corner channels
The crown is split into three faceted faces, and the shaft carries deep vertical corner channels plus a fine grid of mullions and shading tubes. Full detail keeps that grid; Print friendly simplifies the smallest members at a small print size.
- Thin facade grid
The tower's mullions and horizontal tubes are fine detail. A 0.12 to 0.16 mm layer height and a slower print help the grid stay legible up the full height.
- One piece with the ground
The Devon Energy Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Devon Energy Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Devon Energy Center
The Devon Energy Center, also called the Devon Tower, rises 50 stories in downtown Oklahoma City, Oklahoma. The state's tallest building, it has fewer floors than Tulsa's 52-story BOK Tower. It stands beside the historic Colcord Hotel, on Sheridan Avenue in the block between Hudson and Robinson Avenues, and serves as the northern anchor of the city's Core to Shore redevelopment.
Construction began on October 6, 2009, and the tower was completed in October 2012, with an opening ceremony on October 23, 2012. The design was first planned at 54 stories and 925 feet (282 meters), then cut to 50 stories and 844 feet (257 meters). The office tower is joined by a rotunda six stories tall and a podium of the same height, and the complex covers more than 170,000 square meters (1,800,000 square feet).
Devon built the tower to replace its existing corporate office and the commercial space it had been leasing downtown. A public restaurant named Vast was planned for the 49th and 50th floors, and the building topped out at its final height on September 21, 2011. It shares 75th place among United States buildings with Chicago's Park Tower.
About this model
The Devon Energy Center is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
