3D print E-Tower
A free, printable model of E-Tower, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 148 m
- On a 160 mm print
- 41 mm
- Scale
- 1:3,750
148 m of E-Tower, 41 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower at default size
E-Tower is tall at the default print size, so print it slowly with good cooling. A larger print leaves more room for the details near the top.
- One piece with the ground
E-Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. E-Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About E-Tower
E-Tower is a skyscraper of 37 stories in the Vila Olímpia neighborhood of São Paulo, Brazil, near Marginal Pinheiros. It stands 148 meters tall and is built in a postmodern style that takes cues from Frankfurt's Westend Tower. The original design was taller, but the plan was changed because of the intense helicopter traffic in the region.
The tower's structure was designed for concrete with an fck of 80 MPa, which allowed the pillars on the four underground levels to be reduced in size without losing resistance capacity. The smaller pillars made room for more parking spaces. The lobby has a floor-to-ceiling height of 10 meters.
The building is divided into three volumes. Floors 3 to 7 have 1,100 m² of net area each, floors 8 to 19 have 850 m², and floors 22 to 37 have 550 m². Amenities include a heated swimming pool on the 37th floor. There is also an auditorium for 100 people at ground level, a restaurant on the 21st floor, a fitness center on the 20th floor and a helipad on its roof.
About this model
E-Tower is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
