3D print Arena Corinthians
A free, printable model of Arena Corinthians and the surrounding streets and buildings of Itaquera in São Paulo, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 14 mm
- Scale
- 1:4,063
14 mm tall on a 160 mm print
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Terraces around the pitch
The stands rise as a ring of terraces around the field, and they carry most of the small detail. Full detail keeps each step distinct; a larger print helps the smallest ones read.
- Layers on the outer wall
The outside of the bowl is a long, low curve, where layer lines show along the top edge. Layers of 0.12 to 0.16 mm keep that edge crisp, and slower printing with cooling helps on the taller parts.
- One piece with the ground
Arena Corinthians is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Arena Corinthians takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Arena Corinthians
Arena Corinthians, whose official name is the Neo Química Arena, is a football-specific stadium in the Itaquera district of São Paulo, Brazil, the home of SC Corinthians Paulista. The club announced the project in 2010, put its cost at R$335 million and planned for a possible expansion to 70,000 seats. Aníbal Coutinho, of the Rio de Janeiro firm CDC, Coutinho Diegues Cordeiro Arquitetos, was the main architect.
It opened in 2014, with seating for 48,905, and held six matches at the 2014 FIFA World Cup, the tournament's opening game and its third-place match among them. FIFA asked for 65,000 seats or more for the opener, so temporary seating went in, taking usable capacity to 62,200; the extra stands came out once the tournament ended. The first competitive match, on May 18, 2014, ended in a 0–1 home defeat by Figueirense.
After the tournament the club finished fitting the ground out, a job complete by February 2015, with big balconies and scoreboards added where the temporary seats had been. Along the west side runs a pedestrian mall planted with trees and a reflecting pool, part of a landscape design by John Loomis. The arena also hosted the first NFL game played in South America, in 2024, when the Philadelphia Eagles met the Green Bay Packers.
About this model
Arena Corinthians is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
