3D print the Ed Mirvish Theatre
A free, printable 3D model of the Ed Mirvish Theatre and the surrounding city streets and buildings in Toronto, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ed Mirvish Theatre in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine detail at a small scale
A theater facade can have small decorative detail. A bigger print keeps more of it, and a layer height of 0.12–0.16 mm keeps the edges crisp.
- One piece with the ground
The Ed Mirvish Theatre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ed Mirvish Theatre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Ed Mirvish Theatre
The Ed Mirvish Theatre is a historic performing arts venue in Toronto, Ontario. It sits in the Garden District, close to Sankofa Square, and Mirvish Productions owns and runs it. Seating is approximately 2,300 on two levels. Visitors enter from either 263 Yonge Street or 244 Victoria Street.
Thomas W. Lamb designed the theater to host vaudeville performances and films, and it opened on August 28, 1920, as the Pantages Theatre, named for its first manager, Alexander Pantages. Pantages ran a circuit of vaudeville theaters throughout the western U.S. and western Canada, and the Toronto house was its easternmost. At the time it was the largest cinema in Canada, with 3,373 seats originally.
The building has changed names often. It became the Imperial Theatre in 1930 and was divided into six cinemas in a 1972 renovation, reopening in 1973 as the Imperial Six. The Pantages name returned in 1989, and it was renamed the Canon Theatre in 2001. After Mirvish Productions acquired it in 2011 it became the Ed Mirvish Theatre.
About this model
The Ed Mirvish Theatre is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
