3D print Bata Shoe Museum
A free, printable 3D model of the Bata Shoe Museum in downtown Toronto, with its surrounding streets and university buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roof line and wall edges
This is a low, wide building whose shape is carried by the roofline and the edges of its walls. Print at a larger size if you want the facade detail to read; Print friendly adapts the smallest parts.
- One piece with the ground
Bata Shoe Museum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bata Shoe Museum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Bata Shoe Museum
The Bata Shoe Museum in Toronto, Ontario, is devoted to footwear and calceology. It stands in downtown Toronto, near the northwest corner of the St. George campus, part of the University of Toronto. Raymond Moriyama, working with Moriyama & Teshima Architects, led the design of its 3,665-square-meter (39,450 sq ft) building. The collection grew from Sonja Bata's personal holdings, begun in the mid-1940s; a 1979 endowment created the Bata Shoe Museum Foundation, and the museum opened a permanent home in May 1995.
Moriyama shaped the three-story building like the boxes that stored the family's footwear, and its tilted roof looks like a lid set askew on a shoe box. The exterior uses smooth, angle-canted limestone from Lyon, France, with projecting glass walls at the entrance. Planning rules limited the height to 13.4 meters (44 ft). Inside, the building's five floors include two below ground, with a central stair, bronze medallions and a tall stained-glass panel beside it.
The permanent collection holds more than 13,000 shoes and related items, some dating back 4,500 years, and is the world's largest footwear collection. A single permanent exhibition, All About Shoes, surveys footwear through history, while other galleries host temporary and traveling shows. The museum also runs online exhibitions and outreach programs.
About this model
Bata Shoe Museum is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
