3D print Encore Las Vegas
A free, printable model of Encore Las Vegas, its curved hotel tower and low wings beside the neighboring tower, with the roads and green land around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Encore Las Vegas
Encore Las Vegas, which also goes by Encore at Wynn Las Vegas, is a luxury resort with a casino and a hotel in Paradise, Nevada, along the Las Vegas Strip. It adjoins its sister resort, Wynn Las Vegas, which lies directly to the south, and Wynn Resorts owns both. They stand where the older Desert Inn resort once operated; Steve Wynn bought and closed it in 2000. The Palms and St. Andrews towers, two of that resort's hotel structures, were demolished in 2004 to make way for Encore. Ground was broken on April 28, 2006, one year to the day after Wynn Las Vegas opened.
The hotel tower has 48 stories and 2,034 rooms, and its bronze glass is much like that of the tower at Wynn Las Vegas. Reflecting bad-luck superstitions among gamblers, the numbering skips the 13th floor and any floor containing a 4; the top floor is labeled 63 although the tower has 48 stories. The casino floor spans 6,700 m2 (72,000 sq ft), and the property has 5,600 m2 (60,000 sq ft) of convention space. Roger Thomas, a butterfly enthusiast, handled the interior design, and flower and butterfly motifs appear throughout the resort.
Encore cost $2.3 billion to build, with Tutor Saliba as the builder, and Wynn Resorts raised $400 million by selling stock to help pay for it. The doors opened on December 22, 2008, at 8:00 p.m. The Encore Esplanade is an indoor walkway linking to Wynn Las Vegas, and its lattice ceilings let in natural light. One of the restaurants at the opening was Sinatra, which pays tribute to the singer, a friend of Steve Wynn.
How it prints
Make this print opens the generator on a 850 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 38 mm | 1:5,313 |
| 200 mm | 47 mm | 1:4,250 |
| 256 mm | 61 mm | 1:3,320 |
-
North
-
East
-
South
-
West
- A tall, curved slab
- The tower is a tall curved wall with fine vertical window lines. Print slowly with good cooling, and use 0.12–0.16 mm layers to keep the lines crisp; a larger print also helps.
- Low wings at the base
- Several low wings and small entrance canopies sit at the foot of the tower. Print friendly adapts these small details to the print scale, while Full detail keeps them on a larger print.
- One piece with the ground
- Encore Las Vegas is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Encore Las Vegas takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Encore Las Vegas is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Encore Las Vegas STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Encore Las Vegas grows with the print: about 38 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
